Metals, supplied direct.
Structural steel, stainless and aluminium, held as broad capability ranges and delivered to your project spec. If your size sits between the ranges, we cut and fabricate to it.
Steel
Long products, hollow sections, flat-rolled sheet and coil, grinding media and galvanised grating. Custom lengths and sizes to your project requirements.
Long Products
Beams · angles · channels · bars| Product | Range | Notes |
|---|---|---|
| H-beams | 100×100 – 900×300 mm | Structural sections, rolled |
| Angles | 25×25 – 200×200 mm | Thickness 2.5 – 20 mm |
| U-channels | 40 – 200 mm | Rolled channel |
| C-channels | 30 – 150 mm | Made to order in Kuwait |
| Round bars | Ø 10 – 100 mm | Standard 6 m lengths |
| Flat bars | 3 – 60 mm | Cut to length |
Hollow Sections
SHS · RHS · CHS
| Section | Size | Wall |
|---|---|---|
| Square | 12×12 – 300×300 mm | t 1 – 12 mm |
| Rectangular | 26×13 – 400×200 mm | t 1 – 12 mm |
| Circular | 21.3 – 355.6 mm OD | t 1 – 10 mm |
All hollow sections in custom lengths as per project requirements.
Sheets & Coils
GI · HR · CR · chequered · PPGI| Product | Thickness | Width / coating |
|---|---|---|
| Galvanised (GI) | 0.32 – 20 mm | 750 mm – 3 m · Zinc Z120 – Z275 |
| Hot rolled | 1.2 – 25 mm | 900 – 2000 mm |
| Cold rolled | 0.30 – 3.0 mm | 750 – 1550 mm |
| Chequered plate | 1 – 16 mm | Anti-slip pattern |
| Pre-painted (PPGI) | 0.12 – 1.2 mm | 600 – 1250 mm |
Grinding Balls
Grinding mediaForged & cast balls
Grinding media for ball mills.
Ø 20 – 150 mmApplications
Cement plants, mining and power plants.
Sized to your mill
Tell us the mill and the charge; we match diameter and quantity.
Steel Gratings
Hot-dip galvanised Q235 grating for platforms, walkways, trenches and stair treads, with dimensional tolerances held tight to drawing.
- Kuwait Flour Mills & Bakeries Co.
- Ministry of Electricity & Water
- Kuwait Oil Company (KOC)
| Attribute | Specification |
|---|---|
| Material | Q235 carbon steel |
| Finish | Hot-dip galvanised · avg. 30 µm zinc |
| Bearing bar spacing | 30 mm ± 1 |
| Twisted cross bar | 6 mm · spacing 100 mm ± 1 |
| Tolerances | Height ± 1 mm · thickness ± 0.1 mm |
Stainless Steel
Stock and custom fabrication: coils, tube, bar and made-to-drawing fittings.
| Product | Range | Notes |
|---|---|---|
| Coils & sheets | 0.3 – 8 mm | Cut to size |
| Tubes & pipes | 6 – 300 mm OD | Seamless or welded |
| Round bars | Ø 6 – 200 mm | Bright or black |
| Elbows & fittings | 45° / 90° | Made to order |
| Beams | To drawing | Custom fabricated |
Aluminium
Available to your project spec. Send the alloy, temper and size and we will quote it.
Coils & sheets
Plain and chequered plate, cut to size.
0.2 – 6 mmBars & profiles
Flat, round and extruded profiles.
6 – 150 mmTubes & pipes
Round and square tube for frames and services.
10 – 200 mm ODTechnical guidance, included
Send us the drawing or the problem and we help you land on the right spec. Often that means a lighter section, an alternate grade, or a stock size that cuts your cost without touching performance.
Talk to our teamSpec review
We check your material call-outs against what the job actually needs before you commit.
Cost-saving alternatives
Equivalent grades and sizes that hit the same performance for less.
Custom sizing
Between the standard ranges? We cut, fabricate and galvanise to your dimensions.
Mills & makers we work with
Have a spec? We’ll get it to your site.
Send your drawings, sizes or bill of materials. We quote fast and advise where it saves you money.
Request a quote